Replacement boards for 1000LE/2000LE digital systems. 1000LE boards are compatible with duplex digital panels. 2000LE boards are compatible with serial standard digital panels.

Replaces old SR-11030 boards for P1 & P2 series
All Circuit Boards come with:
� Pressure switch (3903)
� Hi limit sensor
� 2-1/2" hole plug
� 4� 18 gauge butt connectors
� 6"� 18" yellow wire
� Field up grade installation

Replacement boards for 2000 Value systems. This board is compatible with Duplex Digital and Lite Duplex Digital panels.

For Brett BL-40 and all Catalina Controls four function boards both 120v and 240v. Complete with retrofi t instructions.

For all MSPA-MP Propak series works with TSC-4 (8 or 10 keys), TSC-8 (8 or 10 keys) or TSC-47 keypads (through jumpers)

For all MSPA-MP-BFs systems. Works with TSC-14 keypads

Note: This board also replaces the Mach 2.1 boards, however the mounting holes are not in the original location. Please order the standoff kit.

Corresponding panel connector must be a phone plug type. Temp sensor/hi limit sold separately.

This item replaces the Hydro-Quip 33-0025-R5 Ultimate Plus board as long as the Lon-Works connector for topside is not being used. Replaces many other TSPA-1 boards.

Replace all TSPA-MP board, 2 pumps, blower and ozonator

Note: It is essential that you provide us with the chip number off the original board so that we may provide you with the proper replacement!

Replaces Dimension One Digital Standard, 1560-75 w/ribbon cable also replaces the D1AR1I std digital for 92-95 Ultra and the 92-93 Platinum.

Replaces Dimension One Serial Deluxe product w/phone plug

Corresponding panel connector must be of a "ribbon" type. Temp sensor/hi limit sold separately.

Temperature and hi limit sensors sold separately. This board is found on Hydro-Quip's CS9400 and ES9400 systems manufactured after 5/03.

Replaces Dimension One Duplex Digital product

Replaces Dimension One Duplex Analog, w/phone plug

These boards require a 120v power supply and can wor with any Duplex Digital. The Super Duplex Digital/M-1 board is found on the Balboa M-1 system.

Any corresponding Duplex panels may be used with these boards. Temp sensor/ hi limit sold separately.

This board is found on Hydro-Quip's CS6200, CS9200, ES6200, and ES9200 systems.

Temperature and hi limit sensors sold separately.

This board replaces all previous versions of the circuit board, including 33-0024-R3 - 33-0024 - 33-0024-R2 - 33-0024-R6. The older versions are no longer available.

It is important to note that your wiring may have to change to support the newer circuit ...

Temperature and hi limit sensors sold separately. This board is found on Hydro-Quip CS and ES 6230 and 9230 series systems.

Replacements for MSPA class systems with varying pump, blower, and ozone confi gurations.

This Spa Control Circuit Board replaces some of the boards used in Icon Leisure Spas, Keys Spas, Weslo Spas, Daybreak Spas and others. This board replaces product identified with chip number ICON10R1A or ICON10RIB.

This Spa Control Circuit Board replaces some of the boards used in Icon Leisure Spas, Keys Spas, Weslo Spas, Daybreak Spas and others. This board replaces product identified with chip number ICONM7R1A.

Replaces Jacuzzi Advantage Analog System Board

Replaces Jacuzzi Advantage System Board

Replaces Jacuzzi Duplex� analog 1-pump w/phone plug

Replaces Jacuzzi Duplex� analog 2-pump w/phone plug

Replaces Jacuzzi Duplex� digital 2-pump w/phone plug

Replaces Jacuzzi Millenium� serial deluxe w/phone plug

Replaces Jacuzzi Value System Board

Based on the Balboa Duplex Digital architecture

Corresponding panel connector is a phone plug type temp sensor/hi limit sold separately.

This circuit board replaces M-2 and M-3 Serial Deluxe and Serial Standard product. This board includes features like 30 day battery backup and optional ORP protection. System type (deluxe or standard) and other features can be determined at the job site with jumpers on the board.

Replacement boards for M7 Power Systems. This board is compatible with Standard Digital or Deluxe Digital panels.

Programmed specifi cally for Hydro Quip's outdoor rated CS8600 and ES8600 systems. Temperature and hi limit sensors sold separately.

This board replacement kit will replace most Gecko MSPA-1 & 4 Spa Circuit Boards.

If you have questions how to install this board or any product you purchase from us, feel free to contact our technical staff for assistance.

The following topside control panels are compatible with the above circuit board: 51705 & 54116 Balboa circuit boards are marked with a �Chip Number� that is located on a white label placed on the logic chip near the center of the board. It is imperative that this number is supplied to Aqua-Man Tech Support staff for proper circuit board match. Just because boards may look similar the ...

Corresponding panel connector must be a phone plug type. Temp sensor/hi limit sold separately.

Replaces SEV50 Seven Seas product

Old style LCD readout for SST-HT12, Hydro Spa & Designer Series boxes

Replaces Sundance 601-605 Series Boards and includes a calibrated temperature sensor. If you are replacing a 601 or 602 board, you must use a Diehl Retrofit Kit!

Replacement boards for SUV Systems. This board is compatible with Lite Duplex Digital panels.

Temperature and hi limit sensors sold separately. This board is found on Hydro-Quip's CS9400, CS8400, ES9600, and ES9400 systems manufactured prior to 5/03.

This is an Upgrade Kit for older MSPA Gecko spa circuit boards. If your original Gecko board is a different shape this board will require the mounting kit as well.

This kit contains the spa circuit board as well as the transformer and the water temperature sensors. This is a kit best only attempted by someone comfortable making mounting and wiring adaptations.