These heater assemblies are commonly found in Hydro-Quip 8000 Series Spa Controls. Hydro-Quip 8000 Series Heater Assembly Specifications: MFG ...
These heater assemblies are commonly found in Hydro-Quip 8000 Series Spa Controls. Hydro-Quip 8000 Series Heater Assembly Specifications:
Most of the parts for the AF Mark II Jet have been discontinued. The replacement internal listed below will replace all the internal parts of your jet and get it working again.
This is a glue in replacement lock ring for the new style Adjustable VSR spa jets that lets them fit in the old style Adjustable VSR Jet Bodies. All the old style VSR Jets are Obsolete.See the installation instructions below for more detail.
Hydro-Air Converta'sagge Spa Jet AssemblyThe Hydro-Air Converta'ssage jet is a simple and inexpensive option for gunite (concrete) spa jets. This jet comes with a 1/2" orifice and is designed for 20-25 Gallons per minute of flow. The use of a blower to "Turbo Charge" the air loop is not recommended.
The Hydro-Air Converta'ssage jet is a simple and inexpensive option for gunite (concrete) spa jets. This jet comes with a 1/2" orifice and is designed for 20-25 Gallons per minute of flow.
The use of a blower to "Turbo Charge" the air loop is not recommended.
Hydro-Air Converta-Massage JetThis simply designed and effective jet is designed to fit a 2-1/2" hole in the spa shell. The Cover and eyeball remove quickly with a counter clockwise twist.This jet body comes with a 5/16" orifice installed and has a recommended flow rate of 9-12 gallons per minute.
This simply designed and effective jet is designed to fit a 2-1/2" hole in the spa shell. The Cover and eyeball remove quickly with a counter clockwise twist.
This jet body comes with a 5/16" orifice installed and has a recommended flow rate of 9-12 gallons per minute.
Available for a variety of Hydro Air jets.This popular jet even allows you to upgrade older redwood and gelcoat spas containing Hydro Air hydrojets. Also available for installation in gunite spas containing 1-1/2" extended venturi tees.
3/4" hole required for installation.
This is the new style Adjustable VSR Jet Internal assembly. This is the only currently available replacement for the Adjustable VSR Spa Jets.The new style body insert lock ring is now included with these repalcement jet faces.
The new style body insert lock ring is now included with these repalcement jet faces.
These are internal replacement parts for the Hydro-Air Magna Series Spa Jet. These parts were widely used in spa manufacturing. All the Magna jet parts shown on this page are interchangeable. The Magna Series jet line is designed to fit a 2-5/8" hole in the spa shell and the jet handle measures approximately 3-1/2" across the front.
These are internal replacement parts for the Hydro-Air Magna Series Spa Jet. These parts were widely used in spa manufacturing. All the Magna jet parts shown on this page are interchangeable.
The Magna Series jet line is designed to fit a 2-5/8" hole in the spa shell and the jet handle measures approximately 3-1/2" across the front.
Fits butterfly, Magna, Microssage, Convertassage, and standard wall fittings with holes
The Hydro-Air Micro Jet is classic. Used in spas for decades the Micro Jet is a work horse of the spa and jetted industry. It has a simple and reliable design which makes it very popular. Hydro-Air Micro Jet Details: Has 1 inch plumbing connections for both air and water. Requires a 1-3/4 inch hole in the spa shell. Equipped with a 5/16" orifice ...
Available in 1" and 1/2" models. 90� min/max for vertical or horizontal applications. 1-1/8" hole size (1/2" control). 1" assembly, hole size 1-3/4".
Available in 1/2" model. Hole size 1-1/8".
90� min/max for vertical or horizontal applications. Hole size required 1-3/4".
With teardrop handle 1" or 1/2" slip socket. 1" air control hole size 1-3/4", 1/2" air control hole size 1-1/8".
The Hydro-Air Standard Hydro Jet is classic. Used in spas for decades the Hydro Jet is a work horse of the spa industry. It has a simple and reliable design which makes it very popular for in-ground spas where there the jets will be difficult to access later. Hydro-Air Standard Hydro Jet Details: Has 1-1/2 inch plumbing connections for both air and water and an ...
This is a replacement for the classic 10-6500 Hydro-Air Strip Skimmer which was discontinued.
Replacement part for the 1-1/2" Strip Skimmer Standard colors are white and bone. Other colors may also be available. Hole size 2-1/2"
This top draw Hydro-Air Air Control Assembly has been found in spas for many years. Available in 1" or 1/2 " models. 1-3/4" hole size (1" control). 1-1/8" hole size (1/2" control).
This Hydro-Air Gunite Venturi Tee has a 1.5" slip inlet, a 1.5" slip outlet and a 3/4" slip air connection.This spa venturi tee is designed with a 1.4" orifice and is recommended for 10-12 Gallons per minute of flow.
This spa venturi tee is designed with a 1.4" orifice and is recommended for 10-12 Gallons per minute of flow.
Fits microjet and slimline, builder, lo profile builder
(201) 809-7500
