Priced to beat the Balboa M-1 system, the 1000LE actually provides more features such as the ability to support dual 2-speed pumps and fiber optic lighting. As with the M-1, the 1000LE requires a 30 amp power supply with 50 amps recommended and is available only with standard pressure switch technology.

This system can operate:
� 120v circulation pump
� 120/240v, 2-speed ...

Replacement boards for 1000LE/2000LE digital systems. 1000LE boards are compatible with duplex digital panels. 2000LE boards are compatible with serial standard digital panels.

Replacement boards for 2000 Value systems. This board is compatible with Duplex Digital and Lite Duplex Digital panels.

The 2000 LE control system is supplied as a dedicated 240v control system with a 24 hour circulation pump circuit, a 2-speed primary pump circuit, and a 240v 1-speed or 2-speed secondary pump circuit. This control system is only available with Balboa's exclusive M-7 technology. Heater location is fixed bottom. Top side panels are sold separately.

HEATER FLO THRU W/PRESS SWITCH 4KW 240V 15IN W/ HIGH LIMIT CRADLE 1.5IN PIECES

FLOW THRU HEATER 4.0KW 15IN 2INX2IN TAILPIECES

The image shown is the 120 volt version of the transformer which has 2 blue connectors.

The 240 volt version of the transformer has one blue connector.

All adapter plates have an outside dimension of 8-9/16" x 3-1/2" and come with a peel off adhesive backing.

These panels replace duplex product and utilize a "phone plug" type connector, 8' cord length.

This panel replaces any analog product. In contrast to serial panels, this panel comes with a ribbon connector. Version "B" of this panel has a smaller bottom and supports the Sundance� 601-605 control systems.

Can be used with standard or deluxe digital systems such as the M-2/M-3 control or the M-7 series power packs. Supplied with 18 foot "phone type connector cord".

This is a kit to turn a single speed Gemini Plus II Pump into a variable speed pump. This kit comes complete with everything you need to convert a standard Gemini Plus II Jetted Bathtub Pump into a variable speed bathtub pump.

This kit will also control a heater and an auxiliary like a light. Includes a programmable length timer.

This Gemini Variable Speed Bathtub Pump Control Kit ...

Note: This board also replaces the Mach 2.1 boards, however the mounting holes are not in the original location. Please order the standoff kit.

Corresponding panel connector must be a phone plug type. Temp sensor/hi limit sold separately.

Note: It is essential that you provide us with the chip number off the original board so that we may provide you with the proper replacement!

Replaces Dimension One Digital Standard, 1560-75 w/ribbon cable also replaces the D1AR1I std digital for 92-95 Ultra and the 92-93 Platinum.

Replaces Dimension One Serial Deluxe product w/phone plug

Corresponding panel connector must be of a "ribbon" type. Temp sensor/hi limit sold separately.

This panel replaces older (non-serial) Deluxe Digital product. In contrast to the serial panel, this panel has both a ribbon cable and a panel backlighting cable. This panel also supports Sundance� 701 and 724 systems.

This is a manufacturer-reconditioned item and is supported by a 90 day Horizon Spa & Pool Parts warranty.

LA Spas Replacement Board

Chip

This panel replaces all previous Serial Deluxe Digital product, and uses a "phone-type" connector.

Ribbon style with connectors. Unshielded cable extension for non-serial standard digital and deluxe digital products.

Replaces Dimension One Duplex Digital product

Replaces Dimension One Duplex Analog, w/phone plug

Works with all Duplex / Value / Standard / Deluxe and all EL Series systems. Includes Holder and Hardware.

These boards require a 120v power supply and can wor with any Duplex Digital. The Super Duplex Digital/M-1 board is found on the Balboa M-1 system.

This panel replaces older (non-serial) Deluxe Digital product. In contrast to the serial panel, this panel has both a ribbon cable and a panel backlighting cable. This panel also supports Sundance� 701 and 724 systems.

These panels replace duplex product and are used on the M-1 control systems and stock Duplex Digital systems. They have a Red LED display and utilize "phone plug" connectors.

This panel can be used on any Duplex Digital System such as the 2000 Value, 2000 SUV, and 1000 LE.

Any corresponding Duplex panels may be used with these boards. Temp sensor/ hi limit sold separately.

8 & 6 conductors with connector. These looms can only be used with serial deluxe and serial standard products.

Stainless steel replacement heater assembly, 4.0kW/240v, 2" x 15" with 2 threaded taps. Fits Value/LE systems made by Balboa.

This system is pre wired with a 15A 120v GFCI cord end. It is designed exclusively for Heat Recovery Jacket systems. Featuring separate heat up/down buttons and a standby mode, this system can operate a 1 speed, 120v pump and a 12v light. Automatic filter, freeze, and hi limit circuits are built in. (control panel required and is sold separately.

Stainless Steel Heater Assembly from Balboa Instruments.

• 1.0 kW.
• 120 Volts.
• 1.5" x 8.5"
• Includes manifold tailpieces.

Other part number for this spa heater assembly: 46-238-1104.

Balboa Instruments Stainless steel replacement heater assembly, 4.0kW/240v or 5.5kW/240v, 2" x 15" with 2 threaded taps, for value/LE systems

2 Straps #30511, 2 Bolts #36151

2" bulb length, 1/4" diameter
31" wire length
2 wire, 2 pin connector

This Spa Control Circuit Board replaces some of the boards used in Icon Leisure Spas, Keys Spas, Weslo Spas, Daybreak Spas and others. This board replaces product identified with chip number ICON10R1A or ICON10RIB.

This Spa Control Circuit Board replaces some of the boards used in Icon Leisure Spas, Keys Spas, Weslo Spas, Daybreak Spas and others. This board replaces product identified with chip number ICONM7R1A.

Replaces Jacuzzi Advantage Analog System Board

Replaces Jacuzzi Advantage System Board

Replaces Jacuzzi Duplex� analog 1-pump w/phone plug

Replaces Jacuzzi Duplex� analog 2-pump w/phone plug

Replaces Jacuzzi Duplex� digital 2-pump w/phone plug

Replaces Jacuzzi Millenium� serial deluxe w/phone plug

Replaces Jacuzzi Value System Board

Based on the Balboa Duplex Digital architecture

Replacement bulb for any Balboa panel equipped with back lighting.

This panel replaces Lite Digital product. It also utilizes the "phone plug" type connector. The 6-conductor version of this panel supports the Lite Leader system.

* Caution: This panel is only compatible with specific OEM systems.

Corresponding panel connector is a phone plug type temp sensor/hi limit sold separately.

This is a smaller, more compact version of the Deluxe Digital, and operates the same functions. Available in both red LED-type display and easy to read LCD display.

These Balboa Heater assemblies are commonly used on their Lite Leader spa control boxes.

Balboa Lite Leader Spa Heater Assembly Features:

• Voltage: 240 V.
• Size: 2" x 15"
• 1/8" tap for pressure switch.
• Does not include tailpieces or pressure switch.

These Balboa Heater assemblies are commonly used on Balboa Value & Le spa control boxes. They are a 2" x 15" heater tube complete with element.

These heaters have two threaded holes on the top of the tube.

Other Part Numbers for this heater:

• 58026
• 46-238-1106

This circuit board replaces M-2 and M-3 Serial Deluxe and Serial Standard product. This board includes features like 30 day battery backup and optional ORP protection. System type (deluxe or standard) and other features can be determined at the job site with jumpers on the board.

These panels are used with the new Balboa M-2/M-3 systems, and are not compatible with any other system.

Balboa Lite Leader Spa Heater Assembly Specifications:

• Output: 5.5 kW.
• Voltage: 240 V.
• Size: 2" x 15"
• Two thread taps for the M7 sensor assembly.

Replacement boards for M7 Power Systems. This board is compatible with Standard Digital or Deluxe Digital panels.

8 button with LCD display & molex type connector. Approximately 9.8" wide x 3.1" tall.

12 button with LCD display & molex type connector. 11.7" wide x 3.2" tall.

Upgrade any Deluxe Digital or Standard Digital System with this infrared remote control.

Upgrade any value or duplex system with this infrared remote control

The following topside control panels are compatible with the above circuit board: 51705 & 54116 Balboa circuit boards are marked with a �Chip Number� that is located on a white label placed on the logic chip near the center of the board. It is imperative that this number is supplied to Aqua-Man Tech Support staff for proper circuit board match. Just because boards may look similar the ...

Corresponding panel connector must be a phone plug type. Temp sensor/hi limit sold separately.

This serial standard digital panel can be used in commercial spa-side applications along with the serial standard digital system. The main panel can be located up to 100' away from the spa in a secure location with the security panel located at the spa allowing the user access only to jets and lights.