Available in 1/4" quick connect style for use on relay coils, T-stats, contactors or GFCIs to prevent nuisance tripping of GFCI.

Enclosed Circuit Board Relay Coil contacts are on bottom of relay at PC board. Trace saver tabs are available at top of relay Action Coil Amps SPDT 12 VDC 30amp

Will Operate Either Two Single Spa Pumps or One Dual Pump, Provide Touch Pad Control of Jets, Spa Light, and Air Blower or Other 20A Accessory.

For Brett BL-40 and all Catalina Controls four function boards both 120v and 240v. Complete with retrofi t instructions.

1/4" mounting hole used

Single pole rated at 25 amps with temperature rating set at 121�F. Best results are obtained when the bulb is installed in a dry well or groove tube at or immediately before the heater 12" capillary length, 5/16" bulb thickness This is a safety device! If it is found to be out of calibration, do not attempt to perform a field adjustment! Replace bad hi limit with a new one

Surface mount hi limit 121�F DP 50 amp 240v

Brett Aqualine HT-1 Replacement Heater Specifications:

• Output: 1.375 kW or 5.5 kW.
• Voltage: 120V or 240V (may require optional contactors for 240v operation).
• Includes: Thermostat, high limit, pressure switch, and indicator light.

This spa heater assembly is convertible for either 120 or 240

For the Brett Aqualine heater manifold

Potter&Brumfield S86 Series Coil Action 120 VAC DPD

Single pole contactor Coil Contact 110 VAC 30amp res

Brushing: 1/2"npt Length: 6" Inside Diameter: 5/16" Material: Rubber/stainless