This air button is large and fairly high volume and fits in a 1-3/4� hole. Len Gordon lists this button�s range as 15 feet for a latching air switch and 150 feet for a momentary air switch, this air button is suitable for a spa or jetted bathtub. This button is available in White, Bone/Beige, Silver and Black.
This button is available in White, Bone/Beige, Silver and Black.
This air button fits in a 1-3/8" hole. Len Gordon lists this button's range as 15 feet for a latching air switch and 150 feet for a momentary air switch, this air button is suitable for a spa or jetted bathtub. This button is available in many colors.It is important to note that the main body and the colored trim are sold separately. You need to order the body and a trim kit to make a ...
This button is available in many colors.
It is important to note that the main body and the colored trim are sold separately. You need to order the body and a trim kit to make a ...
This Len Gordon #4 Air Button fits through a 1-1/4" hole. This button features a top serviceable internal assembly.This air button can be used on momentary air switches up to 75 feet away. This air button should not be used on latching air switches.
This air button can be used on momentary air switches up to 75 feet away. This air button should not be used on latching air switches.
This is a standard air button for 1" PVC pipe. It can be used to control various functions on a pool or spa, depending on the pool/spa control you use it with.
This is a replacement internal assembly for use where there is already a Len Gordon air button installed. As air buttons get older they start to leak and don't work well. This is an easy way to fix up an old button. Threads into any existing #4 body from the top.
Len Gordon AS Multi Combo 95 Air Control Box: This control when combined with an air button will control the switching of a single piece of equipment. The equipment can be 115 volt or 230 volt. This control comes in an outdoor rated box. These are often used as single device controls on a spa or a pool. Maximum load 2 HP.
This control comes in an outdoor rated box. These are often used as single device controls on a spa or a pool. Maximum load 2 HP.
This an outdoor rated spa control box from Len Gordon.It comes with a built in timer and will control a single 100 volt or 220 volt component via a remote air switch (air switch not included). The device can be one or two speed, but one speed will be controlled by the time clock only. This box is a good replacement for the old ASTC-Combo control.
This an outdoor rated spa control box from Len Gordon.
It comes with a built in timer and will control a single 100 volt or 220 volt component via a remote air switch (air switch not included). The device can be one or two speed, but one speed will be controlled by the time clock only.
This box is a good replacement for the old ASTC-Combo control.
This versatile UL listed air switch incorporates the latest alternate action air sensor. It is an economical choice for simple on/off operations. It can be activated from a maximum of 20 feet. Rated: 20 amp, 120/240v. Requires a hi volume button. Do not use the #4 button.
*An Important Note* The timer shown in the picture on this schematic is one of several timers available for the FF-1000LTC. If your timer looks like the one in the picture then you should order the one off of this page. If you timer has a small circle of raised white trippers then it may be a Telechron. The Telechron is no longer available. If you want to replace it you will need to cut
Same as FF-1094TC w/o Time Clock Requires External Time Clock for Two Speed Pumps.
FF-1094LTC Same as FF-1094TC w/Auxiliary Circuit, Second Button Required to Operate an Auxiliary Pump, Blower or Light
One Button Sequences Any Two Pieces of Equipment up to 2 HP, Built In Time Clock Operates Single or Two Speed Pumps, 120/240v, 20 Amp, 1 or 2 HP.
For 3" flow through heater barrel
Digital, 2" bulb length, 1/4" diameter 15" wire length, 2 wire, 3 pin connector.
Potter&Brumfield S89/S90 Series RelayContacts rated at 20 amps. Coil terminals oriented 90� to micro switches Coil Action 120v DPD
Potter&Brumfield S89/S90 Series RelayContacts rated at 20 amps. Coil terminals oriented 90� to micro switches Coil Action 120v SPD
PRESSURE SWITCH 1/8IN NPT 1AMP SPDT 1-5 PSI SS MILLIVOLT GAS HEATERS
Potter&Brumfield S87 SeriesContacts rated at 20 amps. Coil terminals oriented 90� to micro switches. Available in double or single pole Coil Action 120 VAC SPD
Potter&Brumfield S89/S90 Series RelayContacts rated at 20 amps. Coil terminals oriented 90� to micro switches Coil Action 240v DPDT.
Service Kit, Fuses & Terminal Connectors, Assorted Sizes
Service Kit, Miscellaneous Tools w/Case
2" bulb length, 1/4" diameter 60" wire length, 2 wire, 3 pin connector.
Len Gordon TF1-TD Jetted Bathtub Control With Timer This simple bath control with a timer. This control will operate a single speed jetted bathtub pump when attached to an air button (not included).It has plug on the front and a receptacle on the back making installation very simple. Simply plug it in to a standard electrical receptacle and pump the plug into it.This control has a
It has plug on the front and a receptacle on the back making installation very simple. Simply plug it in to a standard electrical receptacle and pump the plug into it.
This control has a
Thermowell Wall Fitting 5/16 T-well with nut requires 1-1/4" hole
Designed for fiberglass or cultured marble tubs with a wall thickness of up to 1". Prevents activation of pump unless water in tub is above a predetermined safe level. Must be used with the Len Gordon MM series air switch or the ETD motor mount switch.
(201) 809-7500
