Lever Replacement clamp part for the Ionic poles with the clamp that closes sideways across the tube. Thumb activated.

Screw that inserts into the clamp lever amd pivot nut Replacement part for the Ionic poles with the clamp that closes sideways across the tube

Pivot nut that inserts into th e clamp lever Replacement part for the Ionic poles with the clamp that closes sideways across the tube

You can dual-jet your brush with these nozzles. (Standard brushes are pencil-jetted) Just drill 2 holes into the brush, push the nozzles in, add some hose along with a "Y" or "T" connector and you're set.

Lever Replacement clamp part for the Ionic poles with the clamp that closes sideways across the tube. Thumb activated.

Screw that inserts into the clamp lever amd pivot nut Replacement part for the Ionic poles with the clamp that closes sideways across the tube

Pivot nut that inserts into th e clamp lever Replacement part for the Ionic poles with the clamp that closes sideways across the tube

You can dual-jet your brush with these nozzles. (Standard brushes are pencil-jetted) Just drill 2 holes into the brush, push the nozzles in, add some hose along with a "Y" or "T" connector and you're set.

You can dual-jet your brush with these nozzles. (Standard brushes are pencil-jetted) Just drill 2 holes into the brush, push the nozzles in, add some hose along with a "Y" or "T" connector and you're set.

You can dual-jet your brush with these nozzles. (Standard brushes are pencil-jetted) Just drill 2 holes into the brush, push the nozzles in, add some hose along with a "Y" or "T" connector and you're set.

You can dual-jet your brush with these nozzles. (Standard brushes are pencil-jetted) Just drill 2 holes into the brush, push the nozzles in, add some hose along with a "Y" or "T" connector and you're set.

You can dual-jet your brush with these nozzles. (Standard brushes are pencil-jetted) Just drill 2 holes into the brush, push the nozzles in, add some hose along with a "Y" or "T" connector and you're set.

Lever Replacement clamp part for the Ionic poles with the clamp that closes sideways across the tube. Thumb activated.

Screw that inserts into the clamp lever amd pivot nut Replacement part for the Ionic poles with the clamp that closes sideways across the tube

Pivot nut that inserts into th e clamp lever Replacement part for the Ionic poles with the clamp that closes sideways across the tube

You can dual-jet your brush with these nozzles. (Standard brushes are pencil-jetted) Just drill 2 holes into the brush, push the nozzles in, add some hose along with a "Y" or "T" connector and you're set.

Lever Replacement clamp part for the Ionic poles with the clamp that closes sideways across the tube. Thumb activated.

Screw that inserts into the clamp lever amd pivot nut Replacement part for the Ionic poles with the clamp that closes sideways across the tube

Pivot nut that inserts into th e clamp lever Replacement part for the Ionic poles with the clamp that closes sideways across the tube

You can dual-jet your brush with these nozzles. (Standard brushes are pencil-jetted) Just drill 2 holes into the brush, push the nozzles in, add some hose along with a "Y" or "T" connector and you're set.

You can dual-jet your brush with these nozzles. (Standard brushes are pencil-jetted) Just drill 2 holes into the brush, push the nozzles in, add some hose along with a "Y" or "T" connector and you're set.

You can dual-jet your brush with these nozzles. (Standard brushes are pencil-jetted) Just drill 2 holes into the brush, push the nozzles in, add some hose along with a "Y" or "T" connector and you're set.