This Cerium Oxide is a high grade optical polishing compound used to remove and polish scratches from mirror bevels, table top edges, television face plates, glass in vehicles or structures. It is mixed with water to form a paste or slurry. This compound has excellent suspension qualities and will not harden. Contains no zinc oxide and meets most local disposal ordinances.

Typically used with cerium oxide for polishing glass, or to remove hard-water stains or tin-etch haze.

5 inch rubber pad attaches to 5/8" x 11 polisher shafts,

Various Polishing discs are then attached to rubber pad.

Typically used with cerium oxide for polishing glass, or to remove hard-water stains or tin-etch haze.

Typically used with cerium oxide for polishing glass, or to remove hard-water stains or tin-etch haze.

5 inch rubber pad attaches to 5/8" x 11 polisher shafts,

Various Polishing discs are then attached to rubber pad.

This Cerium Oxide is a high grade optical polishing compound used to remove and polish scratches from mirror bevels, table top edges, television face plates, glass in vehicles or structures. It is mixed with water to form a paste or slurry. This compound has excellent suspension qualities and will not harden. Contains no zinc oxide and meets most local disposal ordinances.

ABR� Glass De-Etcher is a polishing compound that removes hydrofluoric acid burn stains from glass. Additionally, is removes hard water marks, stains caused by run-off from unsealed masonry, airborne pollution and acid rain haze that causes oxidation to glass.

Typically used with cerium oxide for polishing glass, or to remove hard-water stains or tin-etch haze.

5 inch rubber pad attaches to 5/8" x 11 polisher shafts,

Various Polishing discs are then attached to rubber pad.

Typically used with cerium oxide for polishing glass, or to remove hard-water stains or tin-etch haze.

This Cerium Oxide is a high grade optical polishing compound used to remove and polish scratches from mirror bevels, table top edges, television face plates, glass in vehicles or structures. It is mixed with water to form a paste or slurry. This compound has excellent suspension qualities and will not harden. Contains no zinc oxide and meets most local disposal ordinances.

ABR� Glass De-Etcher is a polishing compound that removes hydrofluoric acid burn stains from glass. Additionally, is removes hard water marks, stains caused by run-off from unsealed masonry, airborne pollution and acid rain haze that causes oxidation to glass.

Typically used with cerium oxide for polishing glass, or to remove hard-water stains or tin-etch haze.

Typically used with cerium oxide for polishing glass, or to remove hard-water stains or tin-etch haze.