Pump, LX 48WUA, Small Frame, 1.0HP, 115V, 10.3/3.8A, 2-Speed, 2"MBT, SD

Pump, LX 48WUA, Small Frame, 1.0HP, 230V, 5.5/2.0A, 2-Speed, 2"MBT, SD

Pump, LX 48WUA, Small Frame, 1.5HP, 115V, 13.8/3.8A, 2-Speed, 2"MBT, SD

Pump, LX 48WUA, Small Frame, 1.5HP, 230V, 8.0/2.6A, 2-Speed, 2"MBT, SD

Circulation Pump, LX 48WTC, 1/8HP, 115/230V, 1.6/0.8A, 1-1/2"MBT, Includes Unions, Side Discharge

Pump, LX 56WUA, Large Frame, 2.0HP, 230V, 8.0/3.0A, 2-Speed, 2"MBT, SD

Pump, LX, Sundance, 48YFr, SD, 2.0HP, 2Spd, 230V, 10.0/3.0A, Without Under-Chassis/Baseless (Foot Bracket- Part Number 6000-532)

Pump, LX 48WUA, Small Frame, 2.0HP, 230V, 10.0/3.0A, 2-Speed, 2"MBT, SD

Pump, LX 56WUA, Large Frame, 3.0HP, 230V, 10.0A, 1-Speed, 2"MBT, SD

Pump, LX 56WUA, Large Frame, 3.5HP, 230V, 11.0A, 1-Speed, 2"MBT, SD

Pump, LX 56WUA, Large Frame, 4.0HP, 230V, 12.0A, 1-Speed, 2"MBT, SD

Pump, LX 56WUA, Large Frame, 4.0HP, 230V, 12.0/4.4A, 2-Speed, 2"MBT, SD

Pump, LX 56WUA, Large Frame, 2-Pole/6-Pole, 4.0HP, 230V, 12.0A, 1-Speed, 2"MBT, SD

Pump, LX 56WUA, Large Frame, 5.0HP, 230V, 15.0 Amp, 1-Speed, 2-1/2"MBT, Side Discharge

Pump, LX 56WUA, Large Frame, 5.0HP, 230V, 15.0/5.0 Amp, 2-Speed, 2-1/2"MBT inlet/outlet, Side Discharge

Allows you to wirelessly perform diagnostic and troubleshooting tasks with a Palm (Palm OS pda with Pocket-tek ServSoft required).

Universal, compact, quiet and powerful, air.wav is a high performance blower that features an 850W motor (120V or 240V), an optional silencer, an optional heater, as well as thermal protection for motor and heater.

Air.wav's true plug & play design makes it easy to install, to connect and to use. Available with different types of connectors and optional integrated electronic controls,

For in.tune stereo

Perfect solution to replace air jet whirlpool controller with 20 minutes timer for blower 120V or variable speed pump

Includes: AMP type 1 cable for pump 2 speeds, 1 cable for pump 1 speed, 1 cable for blower and 1 cable for ozonator

Includes: JJM type 1 cable for pump 2 speeds, 1 cable for pump 1 speed, 1 cable for blower, 1 cable for ozonator and 1 cable for circulation pump

in.tune front panel protective cover - black

For all MSPA-MP Propak series works with TSC-4 (8 or 10 keys), TSC-8 (8 or 10 keys) or TSC-47 keypads (through jumpers)

For all MSPA-MP-BFs systems. Works with TSC-14 keypads

This item replaces the Hydro-Quip 33-0025-R5 Ultimate Plus board as long as the Lon-Works connector for topside is not being used. Replaces many other TSPA-1 boards.

Replace all TSPA-MP board, 2 pumps, blower and ozonator

For M-CLASS AND MSPA systems

This Gecko S-Class Spa Control Pack is versatile and compact. The box contains circuits with Mini JJ style receptacles and works with the TSC-8 LCD style keypad.

The 0202-205160 pack will control a two speed Circulation Pump, two Jet Pumps, an Air Blower, a 12 volt Light, and an Ozonator.

Gecko S-Class Spa Control Pack Features:

• 14-1/4" Wide x 11-1/2" ...

Control System, Gecko SSPA, 1.0/4.0kW, Pump1, Less Receptacles, Less Cords & Spaside

Control: In.Grid Heat Pump Module

Control module for fiber optic with AMP cable

For Light / M-Class packs

For transformer / S-Class packs

For transformer fuse M-Class

TPH-1-CL Probe holder for temperature probe

Control System, (Kit), Gecko IN.YE-5, 240V, 4.0kW, Pump1, Pump2 (1 or 2 Spd), Blower/Pump3 (1 Spd), w/AMP Cords & K450-3OP Spaside

Controller for spa S-CLASS type with outputs: pump 1 with 2 speeds 240V, pump 2 with 1 speed 240V, ozonator 120V, (every output's voltage can be reconfigured), heater 4.0 kw, connector JJM, works with keypad TSC-9, TSC-18 or TSC-19

Auxiliary audio keypad in.k175, black, for in.tune stereo

Includes: in.k450 keypad (0607-005008), overlay (9916-101335) / for in.xe and in.xm 3 outputs systems

IN.XM-1-8-IR-PA-1 IN.THERM Intelligent remote water heating system designed to be totally maintenance free. Separated from pack, in.therm is an intelligent 4kw remote heater that integrates electronics in its power box. It includes a built-in temperature probe and a new water flow detection feature that eliminates the need of a pressure switch. In.therm controls multiple power levels on a ...

30� mounting bezel for in.tune stereo - black

Includes: cables for high current 2 speeds 120V, high current 1 speed 120V, low current 120V, light and keys for P1, P2, BL, OZ

Includes: cables for high current 2 speeds 240V, high current 1 speed 240V, low current 240V, low current 120V, light and keys for P1, P2, BL, OZ

PACK ONLY XM2 *REPLACES ALL XM NO HEATER CORDS OR KEYPAD GECKO IN.XM2

KIT YJ W/ K3001OP KEYPAD HEATER CORDS ADAPTER PLATE

For in.tune stereo

Infrared receptor for M-Class spa systems with 4 pins connector, 6 feet long

Infrared receptor for M-Class spa systems with 6 pins connector, 6 feet long

Includes: k35.in keypad (0607-007028), overlay (9916-101206) / for in.xe 3 outputs systems

Overlay for in.k200, 4 keys: 1 pump, light, temperature up and down

Overlay for TSC-9, 4 keys: 1 pump, light, temperature up and down

Overlay for TSC-9, 4 keys: 2 pumps, light, temperature up and down

Perfect solution to replace water jet whirlpool controller with 20 minutes timer for pump 120V

25' wire length, 3 wire, 4 pin connector

Hi limit sensor (MSPA), use with removable foam sensors only

This board replacement kit will replace most Gecko MSPA-1 & 4 Spa Circuit Boards.

If you have questions how to install this board or any product you purchase from us, feel free to contact our technical staff for assistance.

Overlay, Spaside, LA Spa (Gecko) TSC44, 4-Button, 1-Pump, No Blower, For PL49530

Includes: in.k100 3 auxiliary keypad (0607-009015), overlay (9916-100951) for in.xm spa systems

Dimensions 2" x 4-3/4" The in.k200 is a compact control panel designed to be used with the in.xe Aeware by Gecko control system. This series of entry level keypads is easy to install and comes with an in.link connector.

Includes: in.k200 keypad (0607-008001), overlay (9916-101030) / for 2 pumps or 1 pump and blower in.xe spa systems

This large rectangular panel features 4-buttons, an easy to read LED display, 20ft cord, and an in.link connector specifically for a dual pump in.xe Aeware by Gecko application WHERE A 20ft CORD IS DESIRED.

Includes: k19.in keypad (0607-007026), overlay (9916-101205) / for in.xe spa single-pump systems

Precise, reliable and durable pressure detection switch for spas and hot tubs

Spa Control Pack Gecko S-CLASS type with the following outputs:

• pump 1 with 2 speeds 240V
• pump 2 with 1 speed 240V
• optional circ pump & blower 120V
• ozonator 120V
• every output's voltage can be reconfigured
• heater 4kw
• connector JJM
• works with keypad TSC-9, TSC-18,TSC-19 or TSC-3

Gecko Also uses the number SC-MP-P122-P212-B1-CP1-01-A011-H4.0-JJC-NE-SBD for this ...

Controller for spa S-CLASS, LCD option type with outputs: pump 1 with 2 speeds 240V, pump 2 with 1 speed 240V, optional circ pump & blower 120V, ozonator 120V, (every output's voltage can be reconfigured), heater 4 kw, connector AMP, works with keypad TSC-8-GE2 or TSC-52

Cuts noise levels at the air intake by about 10 db.

For transformer fuse MSPA-1 & 4 and TSPA packs

For transformer / DJS controller

For Circ Pump, Ozone and ACC / M-Class packs

For light / S-Class (SSPA) packs

Spa Side Control, Gecko, In.K600, 11 button, with overlay, Streamline Interface,Compatible with: in.xe, in.xm, in.xm2 & Y Series systems, 8-3/4" x 3-1/4", with 10' cord

Sleek designed and reliable corona discharge ozone generator developed for spa and hot tub manufacturers. Our new spa.o3 uses corona discharge technology to produce a constant concentration of ozone.

Spa.o3 can be installed fl at or wall-mounted horizontally or vertically. It comes with a check valve and a 6' tube to inject ozone in your spa system.

Spaside Control, Gecko TSC18, 4-Button, No Overlay

Spaside Control, Gecko IN.K300-1OP, 4-Button, LCD, Pump1-Light-Up-Down, 10' Cable, w/in.link Plug

Spaside Control, Gecko IN.K300-2OP, 4-Button, LCD, Pump1-Pump2-Light-Temp, 10' Cable, w/in.link Plug

Spaside Control, LA Spa (Gecko) TSC44 SSPA, 8-Button, LCD, No Overlay, JST cord end

Hi limit sensor (SSPA), use with removable foam sensors only

25' wire length, 2 wire, 4 pin connector

48" wire length, 2 wire, 2 pin connector

Identical to:

For pump / S-Class and M-Class packs

For blower / M-Class packs

Includes: in.k600 keypad with streamlined interface (0607-009014), overlay (99916-101382) for in.xm and in.xe systems 5 outputs

Includes: TSC-18 keypad (0202-007134), 1 pump overlay (9916-100239), 2 pumps overlay (9916-100240) / for S-CLASS systems

Includes: TSC-19 keypad (0202-007140), 1 pump overlay (9916-100218), 2 pumps overlay (9916-100219) / for S-CLASS systems

Includes: TSC-19 keypad (0202-007140), overlay (9916-100427) / for S-CLASS systems

Includes: TSC-3 auxiliary keypad (0200-007047), overlay (9916-100261) for M-CLASS systems