No Testing Required! Resists against stains and scale forming by preventing the minerals in the water from reacting to create stains and scale. Used during pool filling and on a regular maintenance schedule, this long-lasting sequestering formula prevents damage to equipment and pool surfaces typically caused by stain and scale formation.

Resist Features:

• Long lasting protection against stains, scale and rust.
• Prevents colored water.
• Protects equipment from corrosion.
• No testing is required.
• Compatible with chlorine, bromine, biguanide, and salt chlorinating systems.

Resist Application:

• Use 16 oz. Resist per 10,000 gallons of pool water. For hard water, (over 200 ppm), high iron, copper or manganese content (over 0.1 ppm), double the initial dosage (32 oz. per 10,000 gallons).
• Add Resist after the pool has been filled. Filled pool should then be circulated overnight before adding chlorine or other pool chemicals to allow Resist to react with and prevent precipitation of minerals in fresh fill water.
• Resist should always be added when a pool is initially filled or when fresh water is added, because most fresh water will contain some stain and scale producing minerals.