Mix Ratios: Flat or vertical surfaces: Apply a sufficient amount of stripper to substrate at 100%. Allow sufficient time to lift paint. Remove with pressure washer. (Hot water pressure washer will improve stripping performance offering as much as 50% reduction in time vs. cold pressure washer unit) Dwell times needed to remove coatings are dependent on the coating thickness, type and age as well as the porosity of the surface. A second application may be necessary. A Whiting, and or cloudy appearance will indicate if a stripping application is necessary. Coating time will vary depending on coating thickness and surface temperature.

• Acrylic coating (8 Mils) Strip time = 1 to 2 hours
• Acrylic (12 mils) over elastomeric (8 Mils) Strip time = 3 hours
• Moisture-cured epoxy (8 Mils) Strip time = 1 to 2 hours
• 2 Part waterborne epoxy (Mils) Strip time = 1 to 2 hours
• Oil & water stains, transparent or pigmented Strip time = 1 hour
• Oil Based Enamel (8 Mils) Strip time = 1 hour
• Two-Component Polyurethane (12 Mils) Strip time = 1 to 2 hours