Item Description
|
Hayward ASTROLITE pool Light:
Add safety and beauty to your pool with a pool light. Available in a choice of attractive face rim models, from an injection-molded patterned design, made of rugged, non-corrosive glass-filled polypropylene; to a smooth, machine-polished stainless steel design, AstroLite Series light fixtures come standard in a wide range of voltages, wattages, and cord lengths to satisfy virtually any installation. Combined with Hayward`s niches, no other pool lighting system provides such value.
Please note that these lights come in 12 volt or 120 volt, 300 watt or 500 watt, with a choice of cord lengths and faceplate type. The available options are shown below and please take care to ensure you order the correct voltage, cord length, wattage, and faceplate that you need.
This light can be used as a replacement for the obsolete Hayward Duralight and Starlight lights.
Hayward ASTROLITE Pool Light Features:
- Patterned, thermoplastic or smooth, stainless steel face rim designs for corrosion-free performance
- E-Z Lock� clamp and reflector assembly for simple relamping
- Blue lens available on SP0584 and SP0583 with stainless faceplace only. 30', 50', and 100' cord lengths.
- 12 Volt, 100 and 300 Watt, 120 Volt, 300, 400, and 500 Watt models for any installation requirement
- 100% tested for safety and quality assurance
- U.L. Listed for fresh water (Guide No. WBDT. File No E39338)
- 1 year limited manufacturer warranty.
Hayward recommends the following light niches for the AstroLite Series light fixture:
- SP0600U / SP0600 PVC DuraNiche for Concrete
- SP0604C / SP0609C Stainless Steel DuraNiche for Concrete
- SP0607U / SP0607 PVC DuraNiche for Vinyl or Fiberglass
Note: SP0600 and SP0607 Niches are no longer manufactured. Use the SP0600U and SP0607U
Special Note: Hayward does not recommend the installation of 12 Volt lights with cord lengths above 50 feet (voltage available to the light is diminished to a level that significantly reduces light output). Hayward does not recommend the installation of 120 Volt lights with cable lengths above 100'. For 12 Volt lights requiring longer than 50' cable or 120 Volt lights requiring cable longer than 100', Hayward recommends using Junction Box SP0680 for 3/4" conduit or SP0681 for 1" conduit, and a light with cable length needed from the lighting fixture to the Junction Box. Lights with longer than 100' cable are not UL listed. |
|